Arri Alexa Plus 16:9 Camera with High Speed License

The ARRI Alexa Plus is the first member of the Alexa camera family. A thoughtful designed digital cinema camera, still going strong since it’s introduction in 2009. Delivering incredible production value at an affordable cost.

The Alexa Plus comes with a 16:9 (Super 35 format) image sensor and original SxS Module that accepts two SxS Pro or SxS Pro+ cards for in-camera ProRes or DNxHD recording. An external recorder is required for ARRIRAW recording. In addition, this camera offers an integrated wireless remote control, ARRI Lens Data System (LDS), additional outputs, and built-in position & motion sensors.

$550 per day

$1650 per week

 

*For discount see package deal here

Kit Includes

ARRI ALEXA PLUS

Licenses: High Speed

HEB-2

Top Handle

EVF-1

EVF Short Cable

EVF Long Cable

EVF Long Cable

Aerial

BP-12

Levelling Block

Dovetail Plate

Shoulder Pad

Camera Power Cable

Camera Power Cable (coiled)

4 Pin to 4 Pin Power Cable

Eyepiece Extension Bracket

19mm Bars Long x 2

15mm Bars Long x 2

4 x 32gb SxS PRO Cards

2 x 64gb SxS PRO Card - high speed available on these cards

Sony SxS Reader and power supply

Technical Data

Sensor

23.76 x 13.365mm

Resolution

1920 x 1080 pixels (16:9 HD)
2048 x 1152 pixels (16:9 2K)
2880 x 1620 pixels (16:9 ARRIRAW)

Frame rate

0.75 - 120fps (in 16:9 mode)

Weight

ALEXA Plus camera body with SxS Module: 7.0 Kg
 

 

SmallHD 702 TOUCH 7" Onboard Monitor

$95 per day

$285 per week

The 702 Touch is an absolute workhorse monitor for full-time creative professionals. It’s extremely durable without adding bulk, it’s daylight viewable without consuming enormous amounts of power, and it’s 100% DCI-P3 colour accurate. With flexible signal options and world-class software tools, the 702 Touch offers ultimate versatility.

For more information visit:

https://www.youtube.com/watch?v=eQqCuuBIEsA

Technical Data

Display

Panel TypeIPS-Type LCD

Display Size7.0" / 17.8 cm

Active Area5.95 x 3.72" / 15.11 x 9.45 cm

Screen Resolution1920 x 1200

Aspect Ratio16:10

Viewing AngleHorizontal: 179°

Touchscreen - Yes

Maximum Brightness1500 cd/m2

Contrast Ratio1000:1

Bit Depth / Color Support8-Bit (16.7 Million Colors)

Pixels Per Inch (ppi)32 ppi

Color Gamut100% DCI-P3

Image Controls

Anamorphic De-Squeeze, False Color, Focus Peaking, Image Flip, Pixel-to-Pixel Zoom, RGB Parade, Screen Markers, Underscan, Waveform

I/O

Video1 x BNC (3G-SDI) Output
1 x BNC (3G-SDI) Input/Output
1 x HDMI Type A Output
1 x HDMI Type A Input

Embedded AudioHDMI
SDI

*For further information please visit:

https://store.smallhd.com/702-Touch

Kit Includes

SmallHD 702 Touch

Sony L Series dummy battery to DTap 30"

Noga Arm

Sunhood

*SD Card NOT supplied

1 x Short BNC

SmallHD 702 OLED 7" Onboard Monitor

with Wooden Camera Director's Cage

$110 per day

$330 per week

SmallHD 702 OLED Monitor

Taking a design cue from their production monitor series, the 702 OLED is encased in a milled aluminum housing and has five custom function buttons, in addition to the joystick and back button for navigating the Page Builder OS. The OLED display itself is protected by a scratch-resistant Gorilla Glass pane, for clear visibility of the dark black levels presented by the OLED display. Around the monitor there are five 1/4"-20 threaded mounting points for attaching the 702 OLED to articulating arms, stands, or securing accessories. At the rear of the chassis are the HDMI and SDI I/O and battery bays. Each bay can take either an LP-E6 or NP-F (L-Series) battery depending on the insertion direction.

Wooden Camera Director's Monitor Cage

The Director's Monitor Cage v2 is engineered to be universally compatible with any monitor up to 9 inches (measured diagonally) and attaches via top, bottom, or rear 1/4-20 mounting locations.  

Ergonomic wooden hand grips can be quickly positioned via the built-in 15mm clamps. The battery mounting plate features V-Mount and Gold Mount attachment points as well as swing away functionality for easy access to the rear of the monitor and installed wireless devices. The cage includes a built in baby pin clamp with locking thumbwheel for stand mounting.

The included sun shade is adaptable to most monitors and snaps directly to the cage frame. The bottom of the shade is made of velcro, which can be adjusted to the proper width of the monitor and an included loop piece can be used to hook onto the bottom of the cage for a more permanent mounting of the shade.

Kit Includes

SmallHD 702 OLED Monitor

Canon LPE6 dummy battery to DTap 30"

Wooden Camera Sunhood

*SD Card NOT supplied

Wooden Camera Director's Monitor Cage with V Lock Plate

1 x Short BNC

Technical Data

Display7.7" / 19.6 cm OLED LCD

Resolution1280 x 800

Pixel Density191 ppi

Aspect Ratio16:10 native

Brightness300 cd/m²

Contrast Ratio10,000:1

Color GamutWide color gamut

Bit Depth8-bit

Viewing Angle160°+

BacklightN/A

Temperature Adaptive Color - Yes

*For further information please visit:

https://store.smallhd.com/store/702-OLED-Monitor

 

Remote Follow Focus - RT Motion Single Channel

$150 per day

$450 per week

The RTMotion Lens Control System is optimised for high-end Wireless and Wired remote control of Cinema and still camera lenses. This kit is all-inclusive for a single-motor setup, as it includes all necessary cables to connect the equipment.

Automatic and manual calibration options combine with a large, adjustable fluid-feel knob to provide lens-friendly adjustments. Navigate the MK3.1 Controller's menu using its push buttons, and view your settings on the OLED screen display. The lightweight MK3.1 system features 42 selectable channels, 16-bit transmission up to 0.9 miles, and minimal latency of 2 ms. Wired operation is supported for locations like medical facilities where RF transmission is not allowed.

Constructed from aerospace-grade aluminum, the MK3.1 Controller is designed with internal antennas to lessen the possibility of damage. A lanyard-mounting point, and three 1/4"-20 mounts provide options for safely securing the controller when you need to free your hands for other tasks. The MK3.1 Controller is powered using widely available Canon LP-E6 batteries, providing a runtime of up to 36 hours. The MK3.1 can also be powered via USB, after removing the spent LP-E6 battery.

Kit Includes

Teredek RT Motion Wireless Lens Control Mk3.1

Mk3.1 Lens Motor

Mk3.1 Receiver

15mm Rod Motor Bracket

Teredek RT Power Cable

Teredek Wired Mode 5pin Cable

Teredek RT Motor Cable

USB to Micro HDMI Cable

US Battery Charger Cable

US Battery Charger

1 x Duracell LPE6 Battery

2 x Canon LPE6N Batteries

Canon LC-E6E Battery Charger and Cable

3 x Blank Focus Discs

Neck Strap

RT Motion Hard Case

Technical Data

Handset Power Requirements

Canon LP-E6 Battery: 6.2 to 8.4 V

TransmissionRate: 16-bit
Range: 0.9 miles (1.5 km)

Latency: 2 ms

Mounting Options

3 x 1/4"-20 holes
1 x lanyard mount

Dimensions Excluding Focus Wheel:

5.5 x 2.8 x 1.2" (140 x 70 x 31 mm)
Including Knob & Antenna:

6.1 x 4.3 x 3" (155 x 110 x 75 mm)

Weight

1.3 lb (576 g)

 

Vaxis Thor 800ft+ Wireless Video Tx and Rx

$200 per day

$600 per week

The Vaxis Thor Rx/ Tx set is capable of wirelessly transmitting visually lossless 1080P60 video and audio up to 200-250 meters.

 

The Vaxis Thor 800FT is the first to feature Dynamic Frequency Selection (DFS) which is compulsory for devices that operate on the 5GHz band to prevent any interference with radar systems. It does this by detecting any frequency pulses during the channel selection process and moves its transmission to another channel if any pulses are detected.

The Receiver has a V Mount with DTap attached so it can be easily powered and also offer a power outlet for a monitor. 

The Transmitter offers a Sony Battery Mount to power it if it can not be mounted to the camera.

Kit Includes

Vaxis Thor Receiver - with V Mount

Vaxis Thor Transmitter

1 x BNC Cable 48"

2 x 2 pin Lemo to DTap power cables

6 X Antennea

1 x Noga Arm

Vaxis Thor Hard Case

Technical Data

Wirelessly transmit visually lossless 1080p60 Video/Audio

Distance: up to 200-250 meters.

TX: SDI In & SDI Out RX: SDI Out x1, HDMI Out x1

Support HDMI & SDI embedded audio transmission.

TX with 2 stick antennas, RX with 3 stick antennas.

Power solution: A. TX with Sony NP-970 plate, RX with V mount/ Gold mount plate. B. 2-Pin LEMO to D-Tap Power Cable.

 

4 x 230Wh V Lock Batteries and

4 Bank Simultaneous Charger

$110 per day

$330 per week

Rated at 230Wh, the V Lock batteries will power the Alexa and its accessories for a substantial amount of time. It is recommended to have a secondary power source to enable hot swapping of batteries. 2 x Block Batteries from other rental houses are recommended to give enough power for a standard day of shooting. These V Locks can take around 5 hours to charge so it is recommended to keep them charging through the production. 

The 4 Bank charger can charge all batteries at the same time, cutting out unnecessary wait times for power. 

Kit Includes

Global Media Pro set 4 230Wh V Lock Batteries

4 Bank Charger and cable

Technical Data

Batteries

Voltage : 14.8 V
Full voltage : 17 V
Cutoff voltage : 11 V
Capacity : 230 Wh
Power limit : 136 W
- 498 minutes with Globalmediapro SCA2S or SCA4S chargers

Charger

Input AC : 90~240 VAC, 47~63 Hz
Output Charging Terminals : 16.8 V 2.5 A
Battery Mount : V-Mount (V-Lock)

Dyna Core 2 Bank V Lock Charger

$25 per day

$75 per week

The Dyna Core 2 Bank V Lock Charger will charge 2 x V Lock Batteries simultaneously, minimising wait time for power on set.

Kit Includes

2 Bank Charger and cable

Technical Data

MountType: V-lock
Input: AC 90V~240V/47Hz~63Hz
Charger Output: DC 16.8V/2.6A
Adapter Output: DC 15V/4A
Dimensions: 231 x 141 x 60.5mm
Operation Temperature: -10~35 oC
Weight: 1.0 Kg

 

4 x 5.65" Full Spectrum IRND Filter Set .3 - 2.1

$90 per day

$270 per week

The Tiffen Full Spectrum IRND Filters are a combination of both an infrared control filter and a neutral density filter. An IRND is ideal for HD cameras, which have greater low-light sensitivity and, subsequently, an increased susceptibility to IR contamination. When using a standard neutral density filter to counter the increased light sensitivity afforded by the HD sensor, the effects of infrared pollution become more apparent. This filter combines an ND filter with a comparable IR control filter to eliminate the spill of infrared light reaching the sensor while still maintaining the extra exposure benefits of a neutral density filter.

Please note, this set can not be split for hire.

Kit Includes

Tiffen IRND Filter set including:

.3, .6, .9, 1.2, 1.5, 1.8, 2.1

All Filters come in protective pouches

114mm Clamp on Misfit Matte Box

$50 per day

$150 per week

The Misfit Kit 2 comprises of an ultra-light weight three stage 4 x 5.65 clamp-on matte box, designed to be compact and easily manoeuvrable and it can be expanded to a rod mount or swing away configuration with optional accessories.

The Misfit matte box features a patented reveal cassette system, which allows you to switch between 3 and 2 stage configuration with no extra parts or tools.

The Misfit Kit 2 also comes with a 114mm clamp lens attachment and three 4 x 5.65 horizontal trays to make sure you are ready for instant action.

This kit also comes with a 15mm rail mount.

Kit Includes

Misfit Mattebox Light weight 2 stage - Carbon Fibre Core - Inc Reveal 3rd Stage

VIV 5" Carbon Fibre Top Flag with Dual Variable Side Wings

Misfit 114mm Clamp Lens Attachment

Misfit Filter Tray 4" x 5.65" Horizontal V2

Misfit Filter Tray 4" x 5.65" Horizontal V2

Misfit Filter Tray 4" x 5.65" Horizontal V2

Misfit Gripper Module

Filter Guard (Misfit and Blacklight)

Hard Mattes for the Misfit (set of 5)

15mm LWS Bracket

For more information and instruction please visit:

https://youtu.be/lHVPPPCdo0M

SHAPE Handles with Arri Rosette

$25 per day

$75 per week

Left and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort.

Kit Includes

2 SHAPE Adjustable handles with Arri Rosette

Magliner Junior with Vehicle Ramps

$50 per day

$150 per week

Magliner Junior camera cart with a Senior shelf for extra room. The cart also features tripod 'horns' and a baby pin for monitor mounting if needed. Cart folds down to flat if needed.

Aluminium ramps fold for easy storage. Ramps have small guards on the side for extra safety when loading trolley into a vehicle.

Kit Includes

1 x Magliner Camera Cart

1 x Aluminium folding ramp

 

Full Camera and Accessory Package Deal

$770 per day

$2310 per week

Take advantage of the complete package deal which gives you the range of items listed for a heavily discounted price. 

The package deal will take the strain out of sourcing parts to complete your camera package.

Please note the package deal must be booked no less than 48 hours in advance and will be subject to availability.

Kit Includes

Arri Alexa Plus 16:9 Digital Camera Kit with accessories

4 x 32gb SxS PRO Cards

2 x 64gb SxS PRO Card

Sony SxS Reader and power supply

RT Motion Single Channel Remote Focus Unit

Misfit Mattebox Light weight 2 stage - Carbon Fibre Core - Inc Reveal 3rd Stage Kit

Tiffen PV IRND Set 4 x 5.65 full set from .3 to 2.1

SmallHD 702 Touch Onboard Monitor with sunhood

SmallHD 702 OLEDDirector's Monitor with Wooden Camera Director's Cage and sunhood

SHAPE Handles with Arri Rosette

4 x 230Wh V Lock Batteries with 4 Bank Charger and cable

Global Media Pro Li65S 65Wh V Lock

Teredek RT Motion Wireless Lens Control Mk3.1 Kit

Vaxis Thor 800' + Wireless HDMI/3G-SDI Transmission Kit (V-Mount) 

2 x 10ft BNC Cables

Magliner Junior Trolley Cart with Vehicle Ramps